Hampton蛋白結晶工具
上海金畔生物代理Hampton?research品牌蛋白結晶試劑耗材工具等，我們將竭誠為您服務，歡迎訪問Hampton?research官網或者咨詢我們獲取更多相關Hampton?research品牌產品信息。
Hampton蛋白質結晶撈針（結晶環）18 mm Mounted CryoLoop™?– 20 micron
HR4-974
Mounted CryoLoop™ – 20 micron
APPLICATIONS
- Cryocrystallography
HR4-965
Hampton 蛋白結晶loop環 Mounted CryoLoop 10 micron with EasySnap MicroTube
| CAT NO | NAME | DESCRIPTION |
| HR4-994 | Mounted CryoLoop – 10 micron | 0.025-0.05 mm – 25 pack |
| HR4-995 | Mounted CryoLoop – 10 micron | 0.05 – 0.1 mm – 25 pack |
| HR4-997 | Mounted CryoLoop – 10 micron | 0.1 – 0.2 mm – 25 pack |
| HR4-999 | Mounted CryoLoop – 10 micron | 0.2 – 0.3 mm – 25 pack |
Adjustable Mounted CryoLoop™ with EasySnap MicroTube
Applications
Cryocrystallography
Features
Adjustable loop orientation
Synthetic CryoLoop on adjustable stainless steel MicroTube
MicroTube specially engineered with EasySnap notches
20 micron diameter nylon CryoLoop
Description?
Similar to the Mounted CryoLoop™ in design and function, the Adjustable Mounted CryoLoop allows one to manipulate and orient the CryoLoop to multiple, unique positions previously unattainable with typical cryo setups. The Adjustable Mounted CryoLoop is a 20 micron diameter synthetic loop mounted inside a malleable stainless steel sleeve, which in turn, is mounted inside the EasySnap MicroTube™.
Using forceps or a probe one can manipulate the angle and orientation of the CryoLoop by bending and adjusting the angle of the malleable stainless steel insert which holds the CryoLoop. The Adjustable Mounted CryoLoop may be positioned several times. Note: Repeated manipulation will fatigue the sleeve which can lead to failure of the sleeve. The Adjustable Mounted CryoLoop is designed to work with the CrystalCap System components.
| CAT NO | NAME | DESCRIPTION |
| HR4-338 | Adjustable Mounted CryoLoop | 0.05 – 0.1 mm – 25 pack |
| HR5-900 | Adjustable Mounted CryoLoop | Sampler – 30 pack (5 of each diameter size 0.1 – 1.0 mm) |
| HR4-336 | Adjustable Mounted CryoLoop | 0.025 – 0.05 mm – 25 pack |
| HR8-102 | Adjustable Mounted CryoLoop | 0.1 – 0.2 mm – 25 pack |
| HR8-072 | Adjustable Mounted CryoLoop | 0.2 – 0.3 mm – 25 pack |
| HR8-104 | Adjustable Mounted CryoLoop | 0.3 – 0.4 mm – 25 pack |
| HR8-106 | Adjustable Mounted CryoLoop | 0.4 – 0.5 mm – 25 pack |
| HR8-108 | Adjustable Mounted CryoLoop | 0.5 – 0.7 mm – 25 pack |
| HR8-110 | Adjustable Mounted CryoLoop | 0.7 – 1.0 mm – 25 pack |
Hampton蛋白結晶小瓶和結晶瓶帽 CrystalCap™
CrystalCap™ ALS
Applications??應用
Cryocrystallography? ?低溫晶體學
Features??特征
ALS style crystal mount for cryocrystallography
CrystalCap ALS attaches magnetically to CrystalCap Vial and Magnetic Goniometer Base
Ledge free conical shape compatible with ALS style grippers, auto mounters and sample handlers
用于低溫晶體學的 ALS 型晶體支架
CrystalCap ALS 以磁性方式連接到 CrystalCap 樣品瓶和磁性測角儀底座
與 ALS 型夾持器、自動貼片機和樣品處理器兼容的無邊緣圓錐形狀
Description?
The CrystalCap ALS is a magnetic sample mount (also known as a cap, pin or goniometer base) designed for cryocrystallography systems that accept ALS style sample mounts. The CrystalCap ALS attaches to a magnetic CrystalCap Vial and magnetic goniometer base. The tip of the CrystalCap accepts a Mounted CryoLoop™ or MicroTube™ fitted with a CryoLoop™.
CrystalCap ALS (HR4-779) is supplied without a vial (HR4-904).
The CrystalCap Vial is a 1.8 ml cryo vial featuring two small vents. A ring magnet is molded into the open end of the vial so that when the cap is positioned in the vial, the ring magnet holds the cap on the vial during cryogenic storage. The HR4-904 CrystalCap Vial does not have a magnet on the bottom of the vial.
The ledge free conical shape of the CrystalCap ALS is compatible with ALS style grippers, auto mounters and sample handlers.
ALS style sample mounters accept the CrystalCap ALS.
HR4-779? ? CrystalCap ALS? ? ?without Vial – 60 pack
APPLICATIONS
- Cryocrystallography
FEATURES
- ALS style crystal mount for cryocrystallography
- CrystalCap ALS attaches magnetically to?CrystalCap Vial?and Magnetic Goniometer Base
- Ledge free conical shape compatible with ALS style grippers, auto mounters and sample handlers
CrystalCap
APPLICATIONS
- Cryocrystallography
FEATURES
- SSRL style sample mount for cryocrystallography
- CrystalCap attaches magnetically to CrystalCap Vial and Magnetic Goniometer Base
- Conical shape with ledge compatible with SSRL style grippers, auto mounters and sample handlers
| CAT NO | NAME | DESCRIPTION |
| HR4-733 | CrystalCap | with Vial – 60 pack |
| HR4-902 | CrystalCap | without Vial – 60 pack |
| HR4-904 | CrystalCap Vial | Vial only – 30 pack |
CrystalCap & Vial
Hampton CrystalCap™ SPINE HT
Applications??應用
Cryocrystallography? ?低溫晶體學
Features? ?特征
SPINE style sample mount for cryocrystallography
CrystalCap SPINE HT attaches magnetically to CrystalCap Vial and Magnetic Goniometer Base
Hollowed out design compatible with SPINE style grippers, auto mounters and sample handlers
2D alphanumeric coding for sample tracking & management
Bar coded, color coded, alphanumeric, magnetic cap
Color coded CryoLoop size
用于低溫晶體學的 SPINE 型樣品架
CrystalCap SPINE HT 以磁性方式連接到 CrystalCap 樣品瓶和磁性測角儀底座
鏤空設計與 SPINE 型夾持器、自動貼片機和樣品處理器兼容
用于樣本跟蹤和管理的 2D 字母數字編碼
條形碼、顏色編碼、字母數字、磁性帽
顏色編碼的 CryoLoop 尺寸
Description
The CrystalCap SPINE HT is a magnetic sample mount (also known as a cap, pin or goniometer base) designed for cryocrystallography systems that accept SPINE style caps. The CrystalCap SPINE HT attaches to a magnetic CrystalCap SPINE Vial and magnetic goniometer base. The tip of the CrystalCap SPINE HT accepts a Mounted CryoLoop™ or MicroTube™ fitted with a CryoLoop™.
The CrystalCap SPINE Vial is a 1.8 ml cryo vial featuring two small vents and is compatible with the CrystalCap SPINE HT. A ring magnet is molded into the open end of the vial so that when the cap is positioned in the vial, the ring magnet holds the cap on the vial during cryogenic storage. The CrystalCap SPINE Vial features chamfered edges for enhanced cap positioning as well as a magnetic alloy bottom for stability. The HR8-114 CrystalCap SPINE Vial does have a magnet on the bottom of the vial.
The hollowed out design of the CrystalCap SPINE HT is compatible with SPINE style grippers, auto mounters and sample handlers.
The CrystalCap SPINE HT features a two dimensional (2D) alphanumeric 16 x 16 data matrix code on the underside of the cap. Each cap is also color coded for CryoLoop size.
| CAT NO | NAME | DESCRIPTION |
| HR8-118 | CrystalCap SPINE HT | 0.025-0.05 mm CryoLoop, without Vial – 30 pack |
| HR8-120 | CrystalCap SPINE HT | 0.05-0.1 mm CryoLoop, without Vial – 30 pack |
| HR8-122 | CrystalCap SPINE HT | 0.1-0.2 mm CryoLoop, without Vial – 30 pack |
| HR8-124 | CrystalCap SPINE HT | 0.2-0.3 mm CryoLoop, without Vial – 30 pack |
| HR8-126 | CrystalCap SPINE HT | 0.3-0.4 mm CryoLoop, without Vial – 30 pack |
| HR8-128 | CrystalCap SPINE HT | 0.4-0.5 mm CryoLoop, without Vial – 30 pack |
| HR8-130 | CrystalCap SPINE HT | 0.5-0.7mm CryoLoop, without Vial – 30 pack |
| HR8-132 | CrystalCap SPINE HT | 0.7-1.0 mm CryoLoop, without Vial – 30 pack |
| HR8-112 | CrystalCap SPINE HT | Cap only – 30 pack |
| HR8-116 | CrystalCap SPINE HT Cap/Vial | Cap/Vial only – 30 pack |
| HR8-094 | CrystalCap SPINE without 2D code/printing | Cap only – 30 pack |
| HR8-114 | CrystalCap SPINE Vial | Vial only – 30 pack |
CrystalCap™ ALS HT
Applications??應用
Cryocrystallography??低溫晶體學
Features??特征
ALS style crystal mount for cryocrystallography
CrystalCap ALS HT attaches magnetically to CrystalCap Vial and Magnetic Goniometer Base
Ledge free conical shape compatible with ALS style grippers, auto mounters and sample handlers
2D alphanumeric coding for sample tracking & management
Color coded CryoLoop size
用于低溫晶體學的 ALS 型晶體支架
CrystalCap ALS HT 磁性連接到 CrystalCap 樣品瓶和磁性測角儀底座
與 ALS 型夾持器、自動貼片機和樣品處理器兼容的無邊緣圓錐形狀
用于樣本跟蹤和管理的 2D 字母數字編碼
顏色編碼的 CryoLoop 尺寸
Description
The CrystalCap ALS HT is a magnetic sample mount (also known as a cap, pin or goniometer base) designed for cryocrystallography systems that accept ALS style sample mounts. The CrystalCap ALS HT attaches to a magnetic CrystalCap Vial and magnetic goniometer base. The tip of the CrystalCap accepts a Mounted CryoLoop™ or MicroTube™ fitted with a CryoLoop™.
The CrystalCap Vial is a 1.8 ml cryo vial featuring two small vents. A ring magnet is molded into the open end of the vial so that when the cap is positioned in the vial, the ring magnet holds the cap on the vial during cryogenic storage. The HR4-904 CrystalCap Vial does not have a magnet on the bottom of the vial.
The ledge free conical shape of the CrystalCap ALS HT is compatible with ALS style grippers, auto mounters and sample handlers.
The CrystalCap ALS HT features a two dimensional (2D) alphanumeric 16 x 16 data matrix code on the underside of the cap. Each cap is also color coded for CryoLoop size.
| CAT NO | NAME | DESCRIPTION |
| HR8-200 | CrystalCap ALS HT | 0.025-0.05 mm CryoLoop – 30 pack |
| HR8-202 | CrystalCap ALS HT | 0.05-0.1 mm CryoLoop – 30 pack |
| HR8-204 | CrystalCap ALS HT | 0.1-0.2 mm CryoLoop – 30 pack |
| HR8-206 | CrystalCap ALS HT | 0.2-0.3 mm CryoLoop – 30 pack |
| HR8-208 | CrystalCap ALS HT | 0.3-0.4 mm CryoLoop – 30 pack |
Hampton 石英毛細管 Quartz Capillaries
Applications??應用
X-ray data collection? ?X射線數據采集
Liquid-liquid diffusion crystallization??液-液擴散結晶
Gel acupuncture crystallization??凝膠針灸結晶
Features??特征
Quartz??石英
Thin walled – 10 micron??薄壁 – 10 微米
| CAT NO | NAME | DESCRIPTION |
| HR6-128 | Quartz Capillary | Size: 0.1 mm – 25 pack |
| HR6-130 | Quartz Capillary | Size: 0.2 mm – 25 pack |
| HR6-132 | Quartz Capillary | Size: 0.3 mm – 25 pack |
| HR6-134 | Quartz Capillary | Size: 0.4 mm – 25 pack |
| HR6-136 | Quartz Capillary | Size: 0.5 mm – 25 pack |
| HR6-138 | Quartz Capillary | Size: 0.6 mm – 25 pack |
| HR6-140 | Quartz Capillary | Size: 0.7 mm – 25 pack |
| HR6-142 | Quartz Capillary | Size: 0.8 mm – 25 pack |
| HR6-144 | Quartz Capillary | Size: 0.9 mm – 25 pack |
| HR6-146 | Quartz Capillary | Size: 1.0 mm – 25 pack |
| HR6-148 | Quartz Capillary | Size: 1.5 mm – 25 pack |
| HR6-150 | Quartz Capillary | Size: 2.0 mm – 25 pack |
| HR6-151 | Quartz Capillary | Size: 2.5 mm – 15 pack |
| HR6-175 | Quartz Capillary | Size: 3.0 mm – 15 pack |
| HR6-177 | Quartz Capillary | Size: 4.0 mm – 5 pack |
| HR6-179 | Quartz Capillary | Size: 5.0 mm – 5 pack |
Applications 應用
Cryocrystallography 蛋白結晶學
| HR4-676 | Cryogenic Foam Dewar (130 ml) – Mini | each |
| HR4-662 | Cryogenic Foam Dewar (500 ml) – Small | each |
| HR4-673 | Cryogenic Foam Dewar (800 ml) – Standard | each |
| HR4-674 | Cryogenic Foam Dewar (1400 ml) – Large | each |
| HR4-675 | Cryogenic Foam Dewar (2 liter) – Tall | each |
Hampton 結晶板封口膜 ClearSeal Film™ and Applicator
Applications?應用
Sealing film used to seal sitting drop crystallization experiments? 使用密封膜來密封座滴板結晶實驗
Features? 特征
1.High optical clarity, low auto-fluorescence
2.Easy to handle film; easy to remove liner
3.Pressure sensitive adhesive
4.For best results use specially designed applicator
5.UV transmissable, compatible with UV imaging systems
6.Low birefringence
7.Certified DNase-, RNase-, and nucleic-acid-free
8.Silicone adhesive is non-tacky until pressed against the sealing surface with the applicator
9.Chemically inert; no extractable except at extreme pH
10.Excellent chemical resistance (e.g. DMSO, Methanol, Acetonitrile)
11.Heat and cold resistant, recommended for temperatures from -70°C and 110°C
特征
高光學透明度、低自體熒光
膜易于處理 ；易拆卸襯墊
壓力敏感粘合劑
為了獲得佳效果 ， 請使用專門設計的涂抹器
傳染性紫外、紫外成像系統兼容
低雙折射
認證 DNase – ， RNase – ， 和核酸的游離
硅酮粘合劑是無粘性的 ， 直到壓在密封表面與涂抹器
化學惰性的 ；除了極端 pH 不能提取優異的耐化學性 (如。DMSO 、甲醇、乙腈)
耐熱耐寒 ， 溫度從 – 70 ° C 至 110 ° C
Crystal Clear Sealing Film
APPLICATIONS??應用
- Sealing film used to seal sitting drop crystallization experiments
密封膜用于密封坐滴結晶實驗
FEATURES? ?特征
- Fits SBS format microplates
- No special applicator required
- Optically clear
適合 SBS 格式的微孔板
無需特殊涂抹器
光學透明
DESCRIPTION??描述
Crystal Clear Sealing Film is an optically transparent sealing film for SBS format 24, 48, 96 and 384 well plates. The 2 mil +/-10% (0.05 mm) thick, optically clear, non-fluorescing polyester film with 1.0 – 1.3 mil (0.025 mm) thick acrylic custom adhesive is designed for the convenient and secure sealing of crystallization plates. A split, optically opaque 2.0 mil +/-10% polyester backing with two end tabs assures a clean uniform adhesive layer and allows for easy, accurate positioning on the plate. Before use, peel off the opaque center protective polyester backing to reveal the optically clear sealing film. Film length: 5.625″ +/- 0.015 Film width: 3.125″ +/- 0.015 End tabs: 0.375″ +/- 0.015 Perforations: 0.415″ +/- 0.015 from edge of film Corner radius: 3/32″. Free of detectable levels of DNase-, RNase- and Human/Mouse DNA contamination (PCR Certified), non-sterile. Recommended temperatures from -40 to +120°C. Not recommended for UV imaging.
Crystal Clear Sealing Film 是一種光學透明密封膜，適用于 SBS 格式 24、48、96 和 384 孔板。 2 mil +/-10% (0.05 mm) 厚、光學透明、無熒光的聚酯薄膜和 1.0 – 1.3 mil (0.025 mm) 厚的丙烯酸定制粘合劑專為方便和安全地密封結晶板而設計。帶有兩個末端標簽的分離、光學不透明的 2.0 mil +/-10% 聚酯背襯可確保清潔均勻的粘合劑層，并允許在板上輕松、準確地定位。使用前，撕下不透明的中央保護聚酯背襯，露出光學透明的密封膜。膠片長度：5.625″ +/- 0.015 膠片寬度：3.125″ +/- 0.015 端片：0.375″ +/- 0.015 穿孔：距膠片邊緣 0.415″ +/- 0.015 角半徑：3/32″。不可檢測DNase-、RNase- 和人類/小鼠 DNA 污染（PCR 認證）的水平，非無菌。推薦溫度為 -40 至 +120°C。不推薦用于紫外線成像。
Film Sealing Paddle??薄膜密封輔助板
APPLICATIONS??應用
- Even and secure application of sealing films to crystallization plates? ?將密封膜均勻且安全地應用到結晶板上
FEATURES??特征
- White, polyethyelene plastic
- 5 paddles per pack
- 2.958″ short side width, 3.250″ long side width, 0.125″ thick
- Less firm than gold paddle
- 白色，聚乙烯塑料
每包 5 個槳
2.958″ 短邊寬，3.250″ 長邊寬，0.125″ 厚
不如金槳結實
- Gold, plastic, nylon reinforced edge
- 1 paddle per pack
- 3 7/8″ wide x 2 15/16″ tall
- More firm than white paddle
- 金色、塑料、尼龍加強邊
每包 1 個槳
3 7/8 英寸寬 x 2 15/16 英寸高
比白槳更結實
| HR4-413 | Film Sealing Paddle – White | 5 pack |
| HR4-525 | 3M Sealing Paddle – Gold | Each |
Hampton 石蠟和硅潤滑油 Paraffin & Silicon Oil
Applications? 應用
Microbatch crystallization? ? microbatch 結晶
Features? 特征
Under oil crystallization?在油中結晶
Protect the sample from oxidation??保護樣品免于氧化
Screen different temperatures without condensation? ?屏幕不同溫度下不凝結
Description? ?描述?
Oils used for microbatch and modified microbatch crystallization under oil.
使用的油和改性 microbatch microbatch 結晶油。
Al’s Oil is a 50:50 (volume:volume) mixture of Paraffin Oil and Silicon Oil. Al’s Oil is named after it’s inventor, Allan D’Arcy.
Al 是機油的 50 ∶ 50 (體積 ∶ 體積) 混合物的石蠟油和硅油。Al 的石油是其發明者的名字命名 ， Allan D ‘Arcy) 。
Paraffin oil
Synonym: Mineral oil
CAS Number [8042-47-5]
EC Number 232-455-8
RTECS PY8047000
MDL Number MFCD00131611
Appearance Colorless, clear, viscous liquid
Refractive Index n20/D 1.467 (literature) n20/D 1.468
IR Spectroscopy Grade
Density 0.838 g/mL at 25°C (literature) 0.85 g/ml at 20°C
Viscosity 40-42 CST at 25°C
Silicon Oil?
Synonyms: Octamethyltrisiloxane
CAS Number: 107-51-7
Appearance: Colorless, clear viscous liquid
Melting Point: -86°C
Boiling Point: 152°C
Refractive Index: 1.38 at 25°C
Viscosity: 1 CST at 25°C
Specific Gravity: 0.82 at 25°C
Density: 0.82 g/mL at 25°C
Surface Tension: 17.4 mN/m
ApplicationsVial support and manipulation
FeaturesStraight end tipHemostat style closureDescription
The Vial Clamp™ – Straight is a chrome plated, hemostat style tool. It has a tip shaped to hold the storage vial of all the CrystalCap Systems™ straight when the clamp is closed. The clamp can be locked using the hemostat style closure. This clamp makes it easy to dip the storage vial into liquid nitrogen for crystal storage. The complete length of the clamp is straight, with an overall length of 195 mm. When the vial is placed in the clamp, the length of it is positioned perpendicular, 90° to the length of the clamp.
| HR4-670 | Vial Clamp – Straight?結晶瓶夾子 | each |
Applications
The CrystalWand Magnetic is designed to be used exclusively with the CrystalCap Magnetic, CrystalCap Copper Magnetic, and CrystalCap HT systems during transfer of the caps from the vial to the goniometer head and from the goniometer to the vial. The 6 1/2” (165 mm) long chrome plated steel wand features a plastic housing enclosing a spring tensioned plunger that when depressed, moves a non-magnetic steel platform away from the magnet housed in the end of the wand. This causes the steel CrystalCap to detach from the wand and be placed readily into the vial or the CryoTong™. When the platform is retracted, the wand securely holds the steel CrystalCap Magnetic. The CrystalWand Magnetic 45° (McMiken Tool) offers the same functionality but is bent at a 45° angle at approximately 2.5 cm from the magnet end.
ApplicationsVial support & manipulation
FeaturesCurved end tipHemostat style closureDescription
The Vial Clamp – Curved is a chrome plated, hemostat style tool. It has a tip shaped to hold the storage vial of all the CrystalCap Systems at an angle when the clamp is closed. The clamp can be locked using the hemostat style closure. The end of the clamp, where the vial is held, is curved at either a 45°/135° or 110°/ 70° angle. When the vial is placed in the clamp, the length of it is positioned to the clamp at either of those same angles. The overall length of each clamp is the same, 195 mm.
Applications
Holds 30 CrystalCap caps for storage or transport
Features
Black polypropylene box with overlap snap closure
Holds 30 caps with or without Mounted CryoLoops™
Description?
Empty black plastic box designed to hold 30 CrystalCap Copper Magnetic HT, CrystalCap Copper Magnetic ALS HT, CrystalCap HT (SPINE), CrystalCap Magnetic or CrystalCap Copper Magnetic without vials. Useful for shipping caps that do not need to be frozen or returning used caps home after a synchrotron trip. The Cap Container is designed for use with Caps only and does not accommodate vials.
| HR8-016 | Cap Container empty??底座盒子 | each |
18 mm Siliconized Glass Cover Slides
APPLICATIONS?應用
- Siliconized glass cover slides for hanging & sitting drop crystallization
- Hanging drop crystallization
- Sitting drop crystallization
- Sandwich drop crystallization
用于懸掛和坐滴結晶的硅化玻璃蓋玻片
懸滴結晶
坐滴結晶
夾心滴結晶
FEATURES??特征
- High purity of glass
- Siliconized, hydrophobic glass surface
- 0.22 mm & 0.96 mm glass thickness
- 18 mm glass diameter
- Circle
- 0.22 mm glass thickness is UV Compatible (>85% transmission)
玻璃純度高
硅化疏水玻璃表面
0.22 毫米和 0.96 毫米玻璃厚度
18 毫米玻璃直徑
圓圈
0.22 毫米玻璃厚度與紫外線兼容（> 85% 透射率）
| 12 mm Siliconized Glass Cover Slides | HR3-278T | Siliconized circle cover slides for Tecan robot |
| HR3-277 | 12 mm x 0.22 mm Siliconized circle cover slides | |
| HR3-279 | 12 mm x 0.22 mm Siliconized circle cover slides | |
| HR8-088 | 12mmx0.96mmThick Siliconized circle cover slides | |
| HR8-090 | 12mmx0.96mm Thick Siliconized circle cover slides | |
| 22 mm Siliconized Glass Cover Slides | HR3-231 | 22 mm x 0.22 mm Siliconized circle cover slides |
| HR3-233 | 22 mm x 0.22 mm Siliconized circle cover slides | |
| HR3-247 | 22 mm x 0.96 mm Thick Siliconized circle cover slides | |
| HR3-249 | 22mmx 0.96mm Thick Siliconized circle cover slides | |
| HR3-215 | 22 mm x 0.22 mm Siliconized square cover slides | |
| HR3-217 | 22 mm x 0.22 mm Siliconized square cover slides | |
| HR3-223 | 22mmx0.96mm Thick Siliconized square cover slides | |
| HR3-225 | 22mmx0.96mm Thick Siliconized square cover slides |
Hampton 水晶透明密封帶Crystal Clear Sealing Tape
3 inch, 1.88 inch, 1.88 inch with dispenser, 0.75 inch with dispenser (left to right)
Hampton HR4-316膠 Super Glue
Loctite? Easy-Squeeze Super Glue Gel
APPLICATIONS
- Staking Glass Fibers to Brass Specimen Pins.
- Staking MicroTube to CrystalCap
FEATURES
- Squeeze grips allow for precise application, keeping fingers glue free
- Locking cap collar prevents leaks and drying out
- Bonds more surfaces than ordinary glues, including: metal, CryoLoops, wood, paper, cardboard, vinyl, leather, rubber, cork, ceramic, china, textiles, brick and fingers.
CryoTong™ – Long
Applications
Crystal transfer under cryo temperature
Features
Artery clamp style closure30 seconds of cryo temperature180 mm length
Description
The CryoTong is a tool used to manually transfer a crystal mounted on a CrystalCap™ from liquid nitrogen to a magnetic base in a goniometer head positioned in a cryogenic stream, and then back to liquid nitrogen. The one-piece, compact CryoTong is available in two lengths. The long CryoTong is approximately 180 mm in overall length. The artery clamp style maintains the CryoTong in the closed position until the clamp is squeezed, which opens the opposing heads. The heads are non-magnetic stainless steel. The handle is magnetic stainless steel. The inside of the head is machined to closely surround the CrystalCap with loop and crystal in place. A small retaining lip is machined into the lower portion of the head to prevent the CrystalCap from slipping out of the CryoTong when the tool is in the closed position. The CryoTong can maintain the temperature of the crystal at -160°C for up to 30 seconds during room temperature crystal transfers. Choose the proper CryoTong size based upon the pin length required by the configuration of the x-ray data collection hardware used. The 18 mm CryoTong (HR5-112) is to be used with the CrystalCap HT and any other CrystalCap configured for 18 mm.HR5-114 Long CryoTong 18 mm, 180° features the head in alignment with the handle of the CryoTong.
applications
Features
CrystalCap Holders are convenient stands for holding all CrystalCap™ systems in liquid nitrogen dewars during crystal cryogenic procedures. Available in two sizes. Both holders feature spring-clips to secure the CrystalCap Vials in the holder. Both stands have 3 inches of adjustable Z (height) which allows one to raise or lower the CrystalCaps to the appropriate height, depending upon the liquid nitrogen level in the dewar. Each holder is supplied with a socket driver for height adjustment.500 ml version holds five CrystalCaps, two 15 ml vials (for liquid propane procedures) and fits into the 500 ml dewar. 1,000 ml version holds eight CrystalCaps, two 15 ml vials (for liquid propane procedures) and fits into the 1,000 ml dewar.